Drawing Checklist
Check which profile, finished-part and production details you already have.
Open the Drawing ChecklistAluminum Cutting Guides & Practical Tips
Choosing a machine? Dealing with rough edges or wasted material? Find a practical guide below, then ask us about your own cutting job.
What are you trying to improve?
Browse by Topic
Practical Guides for Your Next Job
Start with the question closest to the job you are doing.
How to Choose an Automatic Multi-Angle Aluminum Cutting Machine
Review repeated angle work, profile support, the automatic cycle and frame assembly checks before choosing a multi-angle aluminum cutting machine.
X-Ring vs O-Ring: 3 Critical Substitution Checks
X-Ring vs O-Ring is a seal-profile comparison. An X-ring has a four-lobed cross-section; a conventional O-ring has a circular cross-section. For an aluminum housing or cover, a proposed change needs an identified seal and an assessment of the actual sealing arrangement.Begin with the component drawing and assembly reference. Keep the approved seal designation visible while…
Konig vs Persoz: 3 Critical Coating Report Checks
Konig vs Persoz identifies two pendulum methods used in coating assessment. Keep the named pendulum and reported quantity beside each result. Two matching numbers with different method labels do not establish equivalent coating evidence.Konig is the ASCII spelling used here for König. For coated aluminum orders, preserve the spelling and method designation from the actual…
Piezoelectric vs Strain Gauge: 3 Critical Force Checks
Piezoelectric vs strain gauge is a force-sensor selection question about the measurement task. Describe the force history and how long it needs to be observed before comparing an offered measuring chain.A peak-force range leaves important fields unresolved. An aluminum process review may need a brief event, a sustained-force observation or both. Keep that requirement explicit…
Force vs Strain Controlled Fatigue: 3 Critical Checks
Force vs strain controlled fatigue identifies which quantity a cyclic test controls. A report can contain force and strain information while controlling only the specified quantity. Ask the laboratory to name that control mode before comparing its results with another report.For aluminum procurement, keep the requested test tied to the material condition, specimen and engineering…
E3 vs E407: 3 Critical Metallography Checks
E3 vs E407 separates two laboratory document scopes: preparing a metallographic specimen and microetching it for examination. Identify the required work and deliverable before asking a supplier for a metallography quotation.For aluminum stock or components, a cut sample is one stage in the handoff. The laboratory needs its material identity, source location and requested examination.…
Get Your Cutting Details Ready
Use these simple files to collect the details you already know. Unknown items can wait for the discussion.
Cutting List Template
List the finished lengths, quantities, angles and drawing references for your job.
Download the Cut-List FileALUMINUM CUTTING MACHINE QUOTE
Which Machine Fits?
What Will It Cost?
Tell us what you need to cut. We’ll confirm the details with you, recommend a machine and prepare a quote.
- A machine for your partsWe review your aluminum material, size and cutting needs.
- Machine proposal and pricingSee the recommended machine, included equipment and price.
- Help with your cutting problemDiscuss burrs, material waste, slow cutting or too much manual work.
Want to check the cut before ordering?Ask about a sample-cutting test for your material.
Start with just 2 detailsYour name or company + WhatsApp / phone.
No model or drawing needed to get started.
No model or drawing needed to get started.
Prefer to chat?
Chat on WhatsAppSend Your Inquiry
Only your name or company and WhatsApp / phone are required. Everything else is optional.
We’ll use your details to respond to your inquiry. Privacy Policy