Products
Industrial Aluminum Sawing Systems
Aluminum Cutting Machines for Profiles, Extrusions and Aluminum Parts
JiurunCut designs industrial circular-saw cutting systems around the actual aluminum profile, cutting list and production target. Compare automatic feeding, CNC length control, multi-angle cutting, material-saving and semi-automatic configurations, then send your drawing for an engineering recommendation.
- 1-Year Warranty
- Lifetime Technical Support
- Exported to 20+ Countries
- Drawing & Sample Evaluation
Cut Surface
Short Tail
Multi-Angle
Flagship Machine Directions
Choose an Aluminum Cutting Machine by Production Requirement
Start with the finished part, profile geometry, required angle, cutting list and production method. JiurunCut engineers then match feeding, clamping, sawing and material handling to the application.
Flagship Multi-Angle System
Multi-Angle Aluminum Cutting Machine
Typical model: JR-550CNC-CORNER
Programmed circular-saw angle cutting from 20° to 145° for aluminum profiles used in corners, frames and complex assemblies.
View Multi-Angle Machine
Automatic Batch Production
Automatic Aluminum Cutting Machine
Typical configuration: JR-650CNC-3A-1S
Automatic feeding, positioning and circular-saw cutting for repeatable aluminum profile batch production.
View Automatic Machines
Material-Saving Configuration
Zero-Tail Aluminum Cutting Machine
Typical configuration: JR-650CNC-3A-1S Series
Material-saving cutting configurations designed to reduce remaining aluminum stock through controlled feeding and cut planning.
View Zero-Tail MachinesAdditional Machine Directions
More Aluminum Sawing Configurations
Compare the control method, material handling and production workflow that best match the profile and finished part.
CNC Length Control
CNC Aluminum Cutting Machine
Typical model: JR-455CNC
CNC-controlled feeding, length positioning and circular-saw programs for accurate, repeatable aluminum cutting.
View CNC Machines
Profile-Specific Sawing
Aluminum Profile Cutting Machine
Typical model: JR-550
Profile-specific feeding, support and clamping for industrial aluminum sections with different cross-sections and finished lengths.
View Profile Machines
Automated Production Line
Aluminum Extrusion Cutting Line
Typical configuration: JR-650CNC Automatic Feeding Production Line
Automated sawing and material handling for aluminum extrusion production lines and recurring length plans.
View Extrusion Lines
Flexible Small Batches
Semi-Automatic Aluminum Cutting Machine
Typical models: JR-455Q / JR-455Y
Flexible circular-saw cutting for small batches, varied profiles and manual loading workflows.
View Semi-Automatic MachinesVerify the Cutting Result
Evaluate the Cut, Not Only the Machine
Machine selection should be verified with the actual profile, cutting list and inspection method. Review the cut surface, remaining material, dimensional result and angle consistency before confirming the configuration.
Mirror Cut Surface
Clean circular-saw cut surfaces can reduce downstream grinding in confirmed applications.
Tail Waste Reduction
Material-saving configurations are evaluated from raw stock length, cut list and feeding method.
Dimensional Inspection
Length and angle results should be checked using an agreed inspection method.
Multi-Angle Cutting
Angle samples should be verified together with downstream assembly requirements.
Machine Comparison
Compare JiurunCut Aluminum Cutting Machine Categories
Final machine selection depends on the profile drawing, finished lengths, angle requirements, production volume and handling method.
| Machine Direction | Typical Configuration | Best For | Main Capability | View Details |
|---|---|---|---|---|
| Multi-Angle Cutting | JR-550CNC-CORNER | Corners, frames and complex assemblies | Programmed circular-saw angles from 20° to 145° | View machine |
| Automatic Cutting | JR-650CNC-3A-1S | Recurring batch production | Automatic feeding, positioning and sawing | View machines |
| Zero-Tail Cutting | JR-650CNC-3A-1S Series | Material-saving production plans | Controlled feeding and cut planning | View machines |
| CNC Cutting | JR-455CNC | Repeatable finished lengths | CNC-controlled length positioning and saw programs | View machines |
| Profile Cutting | JR-550 | Industrial profile cross-sections | Profile-specific support, clamping and feeding | View machines |
| Extrusion Cutting Line | JR-650CNC Automatic Feeding Line | Integrated extrusion workflows | Automated sawing and material handling | View line |
| Semi-Automatic Cutting | JR-455Q / JR-455Y | Varied small batches | Flexible manual loading with circular-saw cutting | View machines |
These are typical machine directions. The final configuration is confirmed only after the drawing, cutting list and production plan are reviewed.
Engineering Selection Process
Choose the Machine Around the Real Aluminum Profile
A machine should be selected around the actual part and production plan rather than a generic model name.
Send the Profile Drawing
Share the cross-section, alloy, wall thickness, finish and raw stock length.
Confirm Length, Angle and Tolerance
Define finished lengths, angle requirements, critical dimensions and accepted cut quality.
Review Automation and Output
Match feeding, positioning, operator involvement and collection to the production plan.
Verify with Sample Cutting
Agree on representative material, inspection method and acceptance criteria.
Engineering Review
From Your Profile Drawing to the Right Machine Configuration
Our engineers review the profile cross-section, alloy, wall thickness, finished length, cutting angle, tolerance and required output before recommending the feeding, clamping and sawing configuration.
- Profile cross-section and raw stock length
- Finished length and cutting list
- Required angle and tolerance
- Daily or monthly production target
- Current cutting problem
- Sample-cutting and inspection requirement
Pre-Delivery Verification
Every Machine Is Tested Against the Confirmed Cutting Requirement
Before shipment, JiurunCut verifies machine assembly, feeding, clamping, sawing, cut quality and repeatability according to the confirmed aluminum profile and production plan.
- Machine assembly and safety inspection
- Representative aluminum profile cutting test
- Cut surface, length and angle verification
- Pre-shipment commissioning and documentation
- Delivery, installation and training planning
Pre-Delivery Tested
Industrial Applications
Aluminum Cutting Machines for Industrial Applications
Start from the finished component, assembly requirement and production method, then select the cutting process around the real aluminum profile.
New Energy Vehicle Aluminum Parts
Profile cutting for structural, battery and assembly-oriented aluminum components.
Learn More
Energy Storage Aluminum Profiles
Repeatable cutting for frames, enclosures and supporting aluminum structures.
Learn More
Industrial Aluminum Profiles
Flexible and automated sawing for varied industrial profile cross-sections.
Learn More
Heat Sinks
Cut-quality and length-control planning for finned aluminum heat sink profiles.
Learn More
Rail Transit Aluminum Components
Drawing-based sawing solutions for long and complex transport profiles.
Learn More
Curtain Wall Aluminum Profiles
Length and angle cutting workflows for facade and assembly profiles.
Learn MoreBuyer FAQ
Aluminum Cutting Machine Selection Questions
What information is needed to select an aluminum cutting machine?
Send the profile drawing, alloy, wall thickness, raw and finished lengths, tolerance, cutting angle, batch quantity, required output and destination country.
Which machine is suitable for automatic batch production?
The correct configuration depends on the profile and output plan. JiurunCut evaluates automatic feeding, positioning, clamping, sawing and collection after reviewing the drawing and cutting list.
Can JiurunCut machines cut different aluminum profile shapes?
Solid, hollow, multi-cavity and irregular profiles can be evaluated. Suitability depends on profile size, wall thickness, clamping surfaces, straightness and finished-part requirements.
Which machine supports multi-angle cutting?
JR-550CNC-CORNER is the confirmed JiurunCut multi-angle model for programmed profile cutting from 20° to 145° in suitable applications.
How is a zero-tail machine different from a standard cutting machine?
A zero-tail configuration is designed to reduce remaining material through controlled feeding and cut planning. Actual material savings depend on raw stock length, finished lengths, profile geometry and the cutting list.
Can I send samples for a cutting test?
Yes. JiurunCut can review representative material and agree on the test items, inspection method and acceptance criteria before arranging sample cutting.
Do you provide overseas installation and technical support?
JiurunCut provides a one-year warranty and lifetime technical support. Installation, training and service arrangements depend on the machine configuration and destination.
Engineering Application Review
Request a Custom Machine Quote
Share the available profile, part and production information. JiurunCut engineers will review the application and recommend a suitable machine direction.
Your drawing and production information will be used only to evaluate and respond to this inquiry. Accepted file formats and the maximum file size are shown in the upload field.
Application Review
Send Your Aluminum Profile Drawing for a Machine Recommendation
Tell us the profile cross-section, cutting length, angle, tolerance and required output. JiurunCut engineers will recommend a suitable machine configuration and sample-cutting plan.