Email: jiurun888@gmail.comWhatsApp: +86 19901489658

Cutting Basics

Guides to profile support, clamping, straight cutting, miter cuts and the decisions that connect a drawing to a repeatable process.

Guides in This Topic

Long hollow aluminum extrusion with external slots and its section visible on a workshop table.
Illustrative photo of T-slot industrial extrusions, single stock length.
Cutting Basics
October 1, 2026 · About min read

Aluminum Cutting and Drilling: 4 Smart Route Decisions

Review aluminum cutting and drilling routes using finished-part references, stage handovers and complete-part evidence. Compare the same task before quoting.
Read Guide
Three open U-shaped aluminum channel sections of different sizes rest side by side with their ends visible.
Illustrative photo of U-channel aluminum sections, cross-section view.
Cutting Basics
October 1, 2026 · About min read

Aluminum Channel Cutting: 5 Critical Drawing Details

Plan aluminum channel cutting with clear section dimensions, inner opening, finished length, end requirements and an approved orientation.
Read Guide
Three L-shaped aluminum angle sections of different visible sizes standing on a bench.
Illustrative photo of aluminum angle sections, cross-section view.
Cutting Basics
October 1, 2026 · About min read

Aluminum Angle Cutting: 6 Smart Drawing Checks

Identify the angle section, orientation and end geometry before comparing a cutting proposal. Keep length references, mirrored parts and later operations clear in the drawing package.
Read Guide
Short aluminum bar sorting: single batch sample.
Illustrative photo of short aluminum bar sorting, single batch sample.
Cutting Basics
October 1, 2026 · About min read

Aluminum Cut List Revision Control: 5 Clear Rules

Keep drawing changes connected to the cut list, affected quantities and earlier pieces. Use a simple length-change example to make the production handoff clear.
Read Guide
Circular blade on a dark foam pad beside a pen and notebook
Circular saw blade arranged for a tooling review. AI-generated illustration.
Cutting Basics
October 1, 2026 · About min read

Aluminum Saw Blade Kerf: 5 Important Buying Checks

Separate blade cutting width from body thickness, then review stock-loss calculations, complete tool specifications and the application covered by the supplier recommendation.
Read Guide
Curtain wall mullions and transoms: key application section.
Illustrative photo of curtain wall mullions and transoms, key application section.
Cutting Basics
September 30, 2026 · About min read

Thermal Break Aluminum Cutting: 6 Essential Checks

Describe the complete thermal-break profile before requesting a saw review. Clarify materials, incoming condition, end requirements and the evidence a sample can provide.
Read Guide

ALUMINUM CUTTING MACHINE QUOTE

Which Machine Fits?
What Will It Cost?

Tell us what you need to cut. We’ll confirm the details with you, recommend a machine and prepare a quote.

  • A machine for your partsWe review your aluminum material, size and cutting needs.
  • Machine proposal and pricingSee the recommended machine, included equipment and price.
  • Help with your cutting problemDiscuss burrs, material waste, slow cutting or too much manual work.
Want to check the cut before ordering?Ask about a sample-cutting test for your material.
Start with just 2 detailsYour name or company + WhatsApp / phone.
No model or drawing needed to get started.

Prefer to chat?

Chat on WhatsApp

Send Your Inquiry

Only your name or company and WhatsApp / phone are required. Everything else is optional.

JiurunCut | Global Inquiry
Include + and your country code. A regular phone number is fine.
No drawing ready? You can send it later.
We’ll use your details to respond to your inquiry. Privacy Policy