Email: jiurun888@gmail.comWhatsApp: +86 19901489658

Cutting Basics

Guides to profile support, clamping, straight cutting, miter cuts and the decisions that connect a drawing to a repeatable process.

Guides in This Topic

Round aluminum tubes: stock and cut piece.
Illustrative photo of round aluminum tubes, stock and cut piece.
Cutting Basics
September 30, 2026 · About min read

Short Aluminum Part Cutting: 6 Useful Handling Questions

Six review questions connect the short-part drawing to the fixture, collection method, quality checks, batch identity and complete-job output.
Read Guide
Five hollow square aluminum tubes arranged by visible size on a bench, with their enclosed openings facing forward.
Illustrative photo of square hollow aluminum tubes, cross-section view.
Cutting Basics
September 30, 2026 · About min read

Aluminum Tube Cutting: 4 Useful Batch Records

Keep tube batches clear from incoming stock to dispatch. Four practical records connect the correct section, finished length, inspection status and destination.
Read Guide
Industrial aluminum profiles held with profile-specific support and clamping
Industrial aluminum profiles held with profile-specific support and clamping.
Cutting Basics
September 24, 2026 · About min read

Thin-Wall Aluminum Profile Clamping: 5 Practical Checks

Thin-wall sections need a clamping plan based on their real cross-section and finished-part requirements. Here is what to review before choosing equipment.
Read Guide
Long rail transit aluminum extrusion supported along the feeding path
Long rail transit aluminum extrusion supported along the feeding path.
Cutting Basics
September 24, 2026 · About min read

Long Aluminum Extrusion Cutting: 5 Practical Checks

A long extrusion needs a complete support and feeding plan, not just a saw with enough blade capacity. Use this checklist to review the whole material path.
Read Guide
Miter-cut aluminum profile samples arranged as corner joints on a workshop table.
Aluminum corner samples illustrate miter geometry and mating relationships.
Cutting Basics
September 7, 2026 · About 5 min read

Aluminum Miter Cutting: Define the Angle Before the Setup

Make angle-cutting requests clear before comparing machines. Show the joint, length reference, mirrored pieces and visible faces, then agree what a sample must demonstrate.
Read Guide
Hollow aluminum extrusion resting on support blocks with padded side clamps.
Illustrative aluminum profile support and clamping concept.
Cutting Basics
July 14, 2026 · About 5 min read

Aluminum Extrusion Cutting Guide for Industrial Production

Plan the whole job from profile support to finished-part checks. See what to mark on the drawing, what to ask about clamping and how to record changes in the results.
Read Guide

ALUMINUM CUTTING MACHINE QUOTE

Which Machine Fits?
What Will It Cost?

Tell us what you need to cut. We’ll confirm the details with you, recommend a machine and prepare a quote.

  • A machine for your partsWe review your aluminum material, size and cutting needs.
  • Machine proposal and pricingSee the recommended machine, included equipment and price.
  • Help with your cutting problemDiscuss burrs, material waste, slow cutting or too much manual work.
Want to check the cut before ordering?Ask about a sample-cutting test for your material.
Start with just 2 detailsYour name or company + WhatsApp / phone.
No model or drawing needed to get started.

Prefer to chat?

Chat on WhatsApp

Send Your Inquiry

Only your name or company and WhatsApp / phone are required. Everything else is optional.

JiurunCut | Global Inquiry
Include + and your country code. A regular phone number is fine.
No drawing ready? You can send it later.
We’ll use your details to respond to your inquiry. Privacy Policy