Drawing Checklist
Check which profile, finished-part and production details you already have.
Open the Drawing ChecklistAluminum Cutting Guides & Practical Tips
Choosing a machine? Dealing with rough edges or wasted material? Find a practical guide below, then ask us about your own cutting job.
What are you trying to improve?
Browse by Topic
Practical Guides for Your Next Job
Start with the question closest to the job you are doing.
Thread Pitch vs Lead: 4 Critical Drawing Checks
Thread pitch vs lead compares thread spacing with axial travel per revolution. Pitch measures the gap between corresponding points on adjacent threads. Lead describes the relative axial advance of a screw and mating nut during one complete turn.For a single-start thread, the values are equal. For a multiple-start thread, multiply pitch by the number of…
Left Hand vs Right Hand Threads: 3 Critical Checks
Left hand vs right hand threads differ in the direction of their helix. Keep that direction with the complete thread designation and the identified feature. Matching nominal diameter and pitch alone does not establish that two threads will mate.For threaded aluminum parts, begin with the released drawing. For a machine spare, begin with the manufacturer's…
Pump Flow and Head: 3 Critical Quote Checks
Pump flow and head belong together at the required duty point. Maximum flow and maximum head listed separately do not establish the flow available at the head your system needs. Request the offered pump's curve and the defined system requirement.This guide addresses a centrifugal-pump curve in a liquid-circulation proposal. If a cutting-machine offer includes such…
RTD vs Thermocouple: 4 Easy Purchase Decisions
An RTD vs thermocouple decision needs the actual measurement point and its receiving instrument. A temperature-sensor name alone does not specify the complete measurement path. State what temperature is needed, which sensing element supplies it and how the system interprets that element.For a machine purchase, ask whether temperature measurement is part of the offered configuration.…
Aluminum Tee vs Angle: 3 Critical Section Checks
An aluminum tee vs angle comparison starts with the joint's section view. A tee places a stem beneath a crossbar. An angle places two legs at a corner. The outside size and cut length can match while the available attachment faces remain different.This guide uses two original, fictional sections to make that difference visible. The…
Aluminum Rectangular Tube: 3 Critical Face References
An aluminum rectangular tube order needs a section view and a clear reference for each relevant face and end. A cut length identifies the piece along its axis. It does not identify which face later receives a hole or points outward in an assembly.Use the released drawing to connect the stock section, cut blank and…
Get Your Cutting Details Ready
Use these simple files to collect the details you already know. Unknown items can wait for the discussion.
Cutting List Template
List the finished lengths, quantities, angles and drawing references for your job.
Download the Cut-List FileALUMINUM CUTTING MACHINE QUOTE
Which Machine Fits?
What Will It Cost?
Tell us what you need to cut. We’ll confirm the details with you, recommend a machine and prepare a quote.
- A machine for your partsWe review your aluminum material, size and cutting needs.
- Machine proposal and pricingSee the recommended machine, included equipment and price.
- Help with your cutting problemDiscuss burrs, material waste, slow cutting or too much manual work.
Want to check the cut before ordering?Ask about a sample-cutting test for your material.
Start with just 2 detailsYour name or company + WhatsApp / phone.
No model or drawing needed to get started.
No model or drawing needed to get started.
Prefer to chat?
Chat on WhatsAppSend Your Inquiry
Only your name or company and WhatsApp / phone are required. Everything else is optional.
We’ll use your details to respond to your inquiry. Privacy Policy