Opens in a new tab

Aluminum Saw Blade Pinholes: 7 Critical Reorder Checks

A replacement blade can have the right outside diameter and center bore yet still be wrong for the saw. Some blade and flange arrangements use drive or locating pins, and the extra holes must match the actual mounting interface. This guide gives purchasing and maintenance teams seven checks for ordering aluminum saw blade pinholes without treating a catalog photograph or nominal bore as proof of fit.

Why the center bore is only one dimension

A center bore describes the main arbor opening. A pinhole pattern adds separate information: how many holes there are, their diameter, and where their centers sit relative to the blade center. The blade may also have a hub, countersink, keyway, or side-specific feature. These are mounting-interface facts, not aluminum-cutting performance claims. A blade supplier’s published aluminum blade may list several pinhole patterns on the same product page. For example, Freud’s LU5C12 specification lists a 30 mm arbor and multiple distinct pinhole entries. That is a useful reminder to identify the actual variant; it does not establish compatibility with a JiurunCut machine.

1. Identify the installed saw and released blade

Record the machine model, serial number and relevant revision, then find the installed blade’s approved part number or drawing. Ask the machine manufacturer or authorized supplier which blade interface belongs to this exact machine configuration. A family name alone may hide a changed arbor, flange, or blade package. If no approved record is available, treat the proposed blade as a new fit assessment rather than a routine reorder.

2. Document aluminum saw blade pinholes

For aluminum saw blade pinholes, the purchase record should show the center bore, hole count, hole diameter, hole-center circle or equivalent coordinates, and any angular relationship that matters. It should identify which side of the blade the dimensions are viewed from. A compact catalog code can be helpful, but have the supplier explain its notation on a dimensioned drawing instead of assuming every maker uses the same convention. Leitz’s sawing enquiry form separates bore, number of pinholes, countersink, hub dimensions and rotation direction as distinct order fields.

3. Compare the blade with the actual flange arrangement

Check the machine-side interface against the proposed blade drawing, including the mating flange pair and any pins. Verify whether the pinholes are functional for this installation or simply alternative holes offered on a multi-pattern blade. Do not infer that a pin pattern shown in a generic photograph is present on the machine. A qualified person should make this comparison using approved documentation and the safely isolated equipment, following the machine manufacturer’s instructions. Our flange-pair spare guide covers the separate question of identifying the matched machine components.

Aluminum saw blade pinholes are hidden in this illustrative enclosed saw view
Related saw equipment view. Its enclosed cut zone illustrates why a machine photograph cannot verify a hidden blade-to-flange pin pattern; this is not the configuration assessed here.

4. Resolve countersink, keyway and mounting side

Two blades with apparently similar hole locations can differ in countersink form, keyway, hub or the side on which a feature is machined. Ask for these details when the released machine drawing calls for them. Confirm the intended blade face, clamping surface and orientation with the equipment and blade suppliers. Avoid making or enlarging holes, adding informal adapters, or reversing a blade to force a fit. A missing detail belongs on the clarification list, not in an assumed substitution.

5. Keep pinhole fit separate from the cutting specification

Passing the mounting check does not approve the blade for a particular aluminum profile. Diameter, body and kerf thickness, tooth design, permitted speed, profile section, blade travel and the machine’s approved range still need independent confirmation. Nor does a successful cut prove an undocumented mounting interface is acceptable. For a returned sharpened blade, the usable diameter has its own check: see our resharpened-blade diameter guide. Keep the two decisions separate in the receiving record.

6. Make the quotation unambiguous

Send the supplier the released machine identity, approved blade drawing or part number, required hole pattern and any side-specific features. Ask the supplier to return a drawing or written specification for the exact offered item, including all mounting and cutting dimensions, quantity, revision and substitution status. A quote that says only “fits 30 mm arbor” leaves the pin interface unresolved. If the offered pattern differs, require a documented machine-manufacturer assessment before the buyer treats it as interchangeable.

Illustrative engineering drawing and aluminum sample review
Illustrative drawing-and-sample review: the purchase decision needs the actual blade and machine mounting drawings. The pictured profile drawing is not a blade drawing or compatibility evidence.

7. Inspect the delivered item before release

At receipt, compare the blade marking, packaging label and supplier drawing with the purchase record. Have the qualified machine team verify the physical interface by its approved procedure before production use. Record the item and revision actually received, any deviation decision, and the accepted first-cut result for representative stock. A trial is meaningful only after mounting suitability has been independently established. If the fit or paperwork is uncertain, hold that blade from production and resolve the discrepancy with the responsible supplier.

A short RFQ example

“Please quote the approved aluminum circular saw blade for machine [model, serial and revision], matching drawing [number and revision]. Return the exact center bore, pinhole count/diameter/location, countersink or keyway if applicable, hub and side orientation, outer diameter, body thickness, kerf, tooth specification and permitted speed. Identify the offered blade part number and any deviation. We will qualify the delivered blade against the machine documentation and representative cut parts before release.”

This wording is a request for evidence, not a universal mounting recipe. It lets the machine maker and tool supplier confirm the real interface before price or availability drives a substitution.

Related equipment video

The Jiurun Machinery video below shows a saw and feed process in operation. It is a general equipment illustration; it does not reveal or verify this machine’s blade pinholes, the article’s proposed replacement blade, a customer trial or cutting performance.

If you are reordering for an installed JiurunCut saw, send the machine serial number, the currently approved blade identity and the proposed replacement drawing to the supplier. Ask for a written fit response before placing a substitute into production.

ALUMINUM CUTTING MACHINE QUOTE

Which Machine Fits?
What Will It Cost?

Tell us what you need to cut. We’ll confirm the details with you, recommend a machine and prepare a quote.

  • A machine for your partsWe review your aluminum material, size and cutting needs.
  • Machine proposal and pricingSee the recommended machine, included equipment and price.
  • Help with your cutting problemDiscuss burrs, material waste, slow cutting or too much manual work.
Want to check the cut before ordering?Ask about a sample-cutting test for your material.
Start with just 2 detailsYour WhatsApp / phone number + email address.
No model or drawing needed to get started.

Prefer to chat?

Chat on WhatsApp

Send Your Inquiry

WhatsApp / phone and email are required. Your name or company, cutting details and drawings are optional.

JiurunCut | Global Inquiry
Include + and your country code. A regular phone number is fine.
Share any details you know: material or alloy; profile shape, size and wall thickness; cut length and angle; required precision; daily output; automation needs; and current cutting problems. We will use these details to recommend a suitable machine configuration, cutting process and quote. You can add drawings or photos below.
No drawing ready? You can send it later.
We’ll use your details to respond to your inquiry. Privacy Policy